Aspire Cygnet 80W Mod£34.99
DescriptionIntroducing the new Aspire Cygnet mod, powered by a single replaceable 18650 battery, and a maximum wattage output of 80W. It is a highly portable mod that supports Variable Voltage, Variable Wattage and Bypass modes. It's simple in design and has a fire button, 2 adjustment buttons combined to make navigating the mod super easy.
With a thickness of 23.5mm the Cygnet can easily accommodate the majority of your tanks with little or no ‘overhang’! It has no sharp angles in its design making it very comfortable to fit in the hand.
The cygnet has three modes of use, Variable Wattage (1-80w), Variable Voltage (0.5-8v), and Bypass. The Cygnet will fire at resistances between 0.1 and 3.5ohms. It employs a single replaceable 18650 battery which should be of the high rate discharge type. It has an easy to read 0.86 inch OLED screen and a micro USB charging port.
Installing the battery is simplicity itself, just unscrew the battery cover on the base, insert the battery positive contact uppermost (first) then screw the battery cover back in.
Note: always use freshly charged batteries with no damage to the wrappers.
The cygnet comes with all the usual safety features you come to expect from Aspire.
Charging couldn’t be easier, just attach the supplied micro USB cable to the charging port and attach to a power supply, the maximum charge current is 1amp. When the battery charge reaches 4.2V or is fully charged, the mod will stop charging and the screen will switch off.
Please note: Do not leave your mod unattended while charging and always use the usb cable provided to prevent damage to the mod.
- 1 x Cygnet Mod
- 1 x USB cable
- 1 x Warranty Card
- 1 x User Manual
You must be 18+ to visit this website